Chop Saws & Blades

Chop Saws & Blades

World-Class Combination

Power Meets Precision

When you need clean, accurate cuts through steel plate, square tube, angle iron, pipe, and channel, you need a machine engineered for the task — not adapted from it. The right chop saw paired with the right blade transforms demanding metalwork into a controlled, repeatable process that saves time and material on every job.

We've selected the finest cold-cut technology available, combining low heat generation with exceptional cut quality. No grinding edges, no excessive burrs — just precise, professional results backed by a saw and blade system built to last through years of hard use in demanding environments.

Always On Point

Always Accurate,
Never Abrasive

Traditional abrasive chop saws grind through metal, generating heat, sparks, and rough edges that demand finishing work. Cold-cut technology takes a different approach — the blade shears through material cleanly, leaving a smooth, burr-free edge that's ready to weld, paint, or assemble immediately.

Consistent 90° cuts are guaranteed by a rigid fence system and an optimized clamping mechanism that holds workpieces firmly throughout the stroke. Angle cuts up to 45° can be dialled in quickly using the mitering scale, with positive stops at common angles for fast repeat setups.

Whether you're running production cuts in a fabrication shop or making precise one-off measurements on site, accuracy is never negotiable — and with this system, it's never compromised.

Featured Product

The Element 14 Chop Saw —
Built to Last

Every component of this chop saw has been engineered to withstand professional, daily use. The cast aluminium base and robust steel arm provide the rigidity needed for precise cutting, while the heavy-duty vice holds irregular profiles and standard sections equally secure.

Unlike chop saws that wear quickly under sustained use, the cold-cut system maintains its performance over thousands of cuts. Blade life is dramatically longer than abrasive discs, reducing consumable costs and downtime significantly over the tool's working life.

Evolution 14" Chop Saw
Engineering Excellence

Balancing Power
and Safety

A powerful motor is only as good as the safety systems surrounding it. The full blade guard, spark deflector, and integrated work light ensure you can see exactly where you're cutting and stay protected throughout every stroke. The ergonomic handle reduces fatigue during extended use, while the quick-release vice speeds up repeated setups considerably.

The rear sliding fence and 360° rotating vice base make it straightforward to cut compound miters and handle oversized workpieces that would challenge lesser machines.

Full Specifications

The Evolution 14 Chop Saw

  • Motor: 2000W high-torque induction motor
  • Blade diameter: 355mm (14")
  • No-load speed: 1,500 RPM
  • Maximum cutting capacity: 120 x 120mm square section
  • Maximum round section: 115mm diameter
  • Mitering angle range: 0° – 45° left and right
  • Positive miter stops at 15°, 22.5°, 30°, 45°
  • Arbor bore: 25.4mm
  • Machine weight: 17.5 kg
  • Base dimensions: 530 x 400mm
  • Integrated work light for cut-line visibility
  • Rear sliding fence for large-section support
  • 360° rotating vice for compound angles
  • Full blade guard with quick-open for blade changes
  • Safety trigger switch with lock-off
  • Supplied with: TCT blade, clamp bar, and wrench

Evolution 14" Chop Saw
Cutting Consumables

Chop Saw Blades for Steel,
Aluminum & More

The blade you choose determines the quality and speed of every cut. We stock a comprehensive range of TCT and cermet carbide blades optimised for specific materials and applications — because the right blade is just as important as the right saw.

Steel Blade — TCT

 

 

 

 

 

  • Designed for mild steel sections
  • Clean, burr-free cut edge
  • Low heat — no warping
  • Long service life
  • Compatible with 355mm saws

Aluminum Blade — TCT

  • High tooth count for aluminum
  • Anti-kickback tooth geometry
  • Polished, finish-ready cuts
  • Suitable for extrusions & sheet
  • Compatible with 355mm saws

Multi-Material — TCT

  • Cuts steel, aluminum & plastic
  • Versatile all-purpose blade
  • Reduced setup changeover
  • Professional tooth profile
  • Compatible with 355mm saws
Premium Grade

Cermet Carbide Blades —
Strength, Stamina & Always on the Go

Cermet carbide represents the cutting edge of TCT blade technology. The cermet compound — a ceramic-metal alloy bonded to precision-ground tips — delivers exceptional hardness with the toughness needed for sustained production cutting. These blades outlast standard TCT by a significant margin and maintain their sharpness even when cutting harder steel grades and stainless sections.

For workshops running continuous production or contractors who need maximum blade life between changes, cermet carbide is the professional's choice. The fine surface finish produced means less time finishing and more time building.

  • Cermet compound tips for extreme durability
  • Precision-ground for dimensional accuracy
  • Suitable for stainless steel and hard alloys
  • Extended blade life versus standard TCT
  • Available in steel and multi-material configurations
Common Questions

Chop Saws & Blades FAQs

What is a chop saw?
A chop saw is a stationary power tool designed for making fast, accurate cross-cuts in metal sections. Unlike angle grinders or abrasive cut-off saws, a cold-cut chop saw uses a toothed carbide blade to shear through material cleanly — producing smooth edges without the heat, sparks, or grinding debris associated with abrasive cutting methods.
What is the best chop saw blade?
The best blade depends on the material you're cutting and the volume of work. For everyday mild steel, a standard TCT blade delivers excellent results. For aluminum and non-ferrous metals, choose a high-tooth-count TCT blade designed for that material. For demanding production cutting or harder steel grades, cermet carbide blades offer superior longevity and consistent cut quality.
What is the difference between chop saws and miter saws?
Chop saws are purpose-built for cutting metal and are heavier-duty machines designed to handle the hardness of steel and aluminum. Miter saws are typically designed for wood, although some crossover models exist. Metal chop saws use higher-torque motors, appropriate blade geometries, and more robust clamping systems to manage the resistance and vibration produced when cutting dense metal sections.
How do you maintain a chop saw and blades?
Keep the blade guard, base, and vice free from swarf buildup after every session. Inspect the blade for chipped or missing teeth before each use and replace it if damage is found. Apply a light coating of blade lubricant or cutting fluid when working with stainless or hard alloys. Store blades flat in their cases to prevent warping, and never force a cut — let the blade speed and tooth geometry do the work for a longer, sharper service life.
Ready to Cut?

Shop the Evolution 14" Chop Saw

Experience the difference that cold-cut technology and precision engineering make on your next metal cutting project. Built for professionals, priced for serious hobbyists.

Evolution 14" Chop Saw