AMT 3" NPT Submersible Shredder Sewage Pump, 225 GPM, 2HP 1 Phase 230 VAC 60 Hz Motor, S/C Seal, Cast Iron /SS - 5763-95
The AMT 3" NPT Submersible Shredder Sewage Pump 5763-95 features an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include: sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Motors are rated continuous duty and single phase models have thermal overload protection. Minimum liquid requirements must be above 85%. Failure to do so may cause pump damage and void warranty.
- Cast iron with stainless steel motor housing
- Carbide tipped shredder impeller
- Move liquids containing up to 1.1" solids
- Lower Seal – silicon carbide extends seal life
Specifications
SKU
|
5762-95 |
| MFR. MODEL NUMBER |
5762-95 |
| PUMPING CAPACITY |
130 GPM |
| MAX GPH |
7800 |
| MAX TDH |
40 Ft |
| MOTOR |
Electric |
| VAC |
230 @ 60 Hz |
| PHASE |
Three |
| HP |
1 |
| PUMP TYPE |
Sewage-Septic-Drainage-Shredder-Dirty Water |
| CONSTRUCTION |
Cast Iron Casing /Stainless Steel Motor Housing |
| DISCHARGE |
3” NPT |
| FLUID MIX |
Min 85% liquid required |
| MAX SOLIDS |
1" |
| SHAFT SEAL MATERIAL |
Silicon Carbide |
| WEIGHT |
50 lbs |
| LENGTH |
8.9" |
| WIDTH |
11.4" |
| HEIGHT |
18.5" |
| WARRANTY |
12 Months |
| SPECS SHEET |
5762-95 Specs Sheet
|
| OWNER'S MANUAL & PARTS SHEET |
5762-95 Owner's Manual & Parts Sheet |
What Our Experts Think
-
Heavy-Duty Submersible Sewage Pump – Designed for wastewater, sewage, and solids-laden applications.
-
Powerful 1HP, 115V Motor – Operates efficiently on standard household or industrial power supply.
-
Shredder Impeller Technology – Effectively breaks down solids to prevent clogging and improve flow.
-
130 GPM Flow Rate – Handles high-capacity water movement for residential, commercial, and industrial use.
-
Cast Iron & Stainless Steel Construction – Corrosion-resistant materials ensure durability and long service life.
-
Sealed for Submersible Use – Reliable operation in wet environments, including sump pits, sewage basins, and wastewater treatment.
-
Single-Phase Operation – Simple setup and use with standard electrical connections.
-
Ideal for Wastewater, Sump & Sewage Applications – Perfect for septic systems, drainage, and municipal sewage management.
Q&A
Q: What is the AMT 2" NPT Submersible Shredder Sewage Pump 5760-95?
A: A heavy-duty 2" NPT submersible pump designed for sewage and wastewater applications, featuring a shredding impeller for handling solids.
Q: What is the maximum flow rate?
A: It delivers up to 130 gallons per minute (GPM).
Q: What is the motor power and voltage?
A: It has a 1HP, single-phase 115V AC motor operating at 60 Hz.
Q: What materials is it made of?
A: Constructed from cast iron and stainless steel for durability and corrosion resistance.
Q: What type of seal does it use?
A: It features a silicon carbide (S/C) seal for enhanced wear and chemical resistance.
Q: What is the purpose of the shredder mechanism?
A: It efficiently grinds solids and debris to prevent clogging, making it ideal for sewage and wastewater applications.
Q: Is this pump suitable for continuous operation?
A: Yes, it is designed for continuous-duty sewage and wastewater pumping.
Q: Does it require special installation?
A: It is submersible and typically requires proper wiring and discharge piping for efficient operation.
Q: Is there a warranty?
A: AMT typically provides a limited warranty—check with the manufacturer for specific details.
Maintenance Tips
-
Flush After Use: Run clean water through the pump to remove debris and prevent buildup.
-
Inspect Impeller and Shredder Mechanism: Check for blockages or wear to maintain efficiency.
-
Check Power Cord and Connections: Ensure there are no frays or loose connections before operation.
-
Monitor Seal and Gaskets: Inspect for leaks to prevent water damage to the motor.
-
Clean the Intake Screen: Remove accumulated debris to maintain proper flow rate.
-
Store Properly: Keep in a dry, ventilated area when not in use to prevent corrosion.
