Chicago Pneumatic RCP-C7581VS Air Compressor 7.5HP 80 Gal. Two Stage Single-Phase 208-230V Iron Series New - 8090253017
Chicago Pneumatic's RCP Iron Series air compressors feature all cast iron pumps. Equipped with finned coolers and a splash lubricated oil system for unmatched heat dissipation. Featuring automotive style wrist pins and connecting rod bearings, concentric ring valves, and start-stop pressure switch control. All units are 100% tested at full pressure.
What our Experts Think
-
Heavy‑duty two‑stage performance
The Chicago Pneumatic RCP‑C7581VS 7.5 HP 80 Gal Two‑Stage Air Compressor delivers robust compressed air (≈23 CFM @ 100 PSI) with a 175 PSI max pressure, making it suitable for workshops, automotive service bays, and light industrial environments where reliable airflow is essential.
-
Rugged Iron Series construction
Built with an all‑cast‑iron two‑stage pump, this compressor offers excellent heat dissipation, durability, and long service life compared with lighter materials—ideal for heavy daily use.
-
Quiet and smooth operation
Low RPM pump design coupled with quality components results in quieter running and reduced wear over time, improving comfort and longevity in busy workspaces.
-
Generous 80 gallon air reserve
The ASME‑certified vertical receiver provides a large air buffer, allowing longer run times between cycles and supporting multiple simultaneous tools without significant pressure drop.
-
Single‑phase convenience
Designed for 208‑230 V single‑phase power, it fits typical workshop electrical setups without needing three‑phase power infrastructure.
-
Professional safety and service features
Includes a magnetic starter, splash lubrication system, and full 2‑year warranty, helping protect your investment and simplify maintenance.
Q&A
Q: What type of compressor is the RCP‑C7581VS?
A: A two‑stage reciprocating (piston) air compressor from Chicago Pneumatic’s rugged Iron Series, designed for heavy‑duty workshop and industrial use.
Q: What are the power and electrical specs?
A: Powered by a 7.5 HP motor on 208‑230 V single‑phase power — ideal for demanding compressed air needs in professional settings.
Q: What is the tank capacity and orientation?
A: Equipped with an 80 gallon ASME/CRN certified vertical tank for substantial air storage.
Q: How much airflow and pressure does it deliver?
A: Produces about 23 CFM at 100 PSI, with a maximum pressure up to 175 PSI, capable of powering pneumatic tools and equipment.
Q: What durability features does it include?
A: The all‑cast iron pump and robust design ensure long life and reliable performance under continuous use.
Q: Does it include safety and control features?
A: Includes a magnetic starter and fully enclosed belt guard to protect components and improve safety.
Q: Is it suitable for noisy environments?
A: The low‑RPM design enhances durability and helps reduce operational noise compared with higher RPM units.
Maintenance Tips
-
Change compressor oil regularly: Replace oil per manufacturer schedule (typically every ~500 hrs) to protect internal bearings and extend pump life.
-
Drain tank moisture daily: Open the drain valve after each use to remove accumulated water from the 80 gal tank — prevents rust and maintains air quality.
-
Inspect/clean air filter: Check intake filters frequently; clean or replace when dirty to ensure proper airflow and reduce pump strain.
-
Check belts & pulleys: Inspect drive belts for wear, cracks, or looseness; adjust tension or replace worn belts to maintain efficient power transfer.
-
Tighten fittings & connections: Periodically check all fasteners, air line fittings, and electrical connections for tightness to prevent leaks and maintain performance.
-
Clean cooling fins & motor: Remove dust/debris from pump cooling fins and motor housing to improve heat dissipation and avoid overheating.
-
Verify pressure controls: Test pressure switch cut‑in/cut‑out settings and gauge accuracy to keep operations safe and efficient.
-
Ensure proper ventilation: Place the compressor in a well‑ventilated, uncluttered area to support cooling and safe service access.
-
Annual professional service: Have a qualified technician inspect valves, safety relief devices, and electrical systems for preventive care.
