Curtron SPD-20-AL-DBL-9696 96" x 96" Service-Pro Series 20 Swinging Door - CUSPD20ALDBL9696
The Curtron SPD-20-AL-DBL-9696 is designed specifically to increase customer and employee comfort. It does this by reducing the noise coming from the kitchen, stock rooms, warehouses, and other such areas while providing years of dependable service. The Service-Pro Door has an attractive design, engineered of .063" tempered aluminum with a satin anodized finish. It has two 9" x 14" clear windows. It does not come with a kickplate or bottom pin. The SPD-20-AL-DBL-9696 does, however, come with a hinged assembly and bottom pin. It has two 48" x 96" door panels.
Features
- (2) 48" x 96" door panels
- .063" tempered aluminum with satin anodized finish
- (2) 9" x 14" clear windows
- No kickplate / impact plate
- Hinged assembly and bottom pin
- Increases customer and employee comfort by reducing noise and providing years of dependable service
- Every Service-Pro door comes with the outstanding customer service and support of Curtron Products
- Attractive impact doors used in customer and back kitchen areas as well as in retail and industrial environments
- Creates a barrier between customers and kitchens, stock rooms, warehouses and more
Specifications
- Model: SPD-20-AL-DBL-9696
- Dimensions: 96" H x 96" W
- Approximate Weight: 224 lbs.
What our Experts Think
-
Extra-Wide Double-Swing Opening: Offers a 96″ wide × 96″ high opening with two equal-sized panels, providing generous clearance for personnel, carts, or two-way traffic.
-
Light-Duty Aluminum Construction: Made with .063″ tempered aluminum and a satin-anodized finish, ideal for moderate-traffic areas such as kitchens, service zones, or light commercial spaces—not intended for heavy cart or forklift use.
-
Built-In Visibility Windows: Each panel includes a 9″ × 14″ acrylic window to improve safety by allowing sight-lines through the doorway.
-
Efficient Traffic Management: Bi-parting double-swing design helps manage two-way flow, reducing collisions and improving workflow between customer and service areas.
-
Installation Considerations: Ensure the rough opening accommodates 96″ W × 96″ H, allow sufficient swing clearance on both sides, and confirm the wall/frame can support the door size.
Q&A
Q: What is the SPD‑20‑AL‑DBL‑9696 model?
A: A double‑leaf aluminum swing door from the Service‑Pro Series 20, designed for commercial use in high‑traffic areas.
Q: What are its dimensions and panel configuration?
A: Measures 96″ wide × 96″ high, with two 48″‑wide × 96″‑high panels that swing in both directions.
Q: What are the key construction and material features?
A: .063″‑thick anodized aluminum panels, built‑in 9″ × 14″ clear windows, and reinforced spines for durability in commercial environments.
Q: What environments is this door best suited for?
A: Ideal for restaurant back‑of‑house entrances, retail service zones, convenience‑store access points, or any commercial setting needing wide bidirectional traffic flow.
Q: What should installers verify before purchase and installation?
A: Ensure the rough opening accommodates 96″ W × 96″ H, confirm swing clearance for both panels, check frame and hardware support, and select finish and hardware appropriate for the facility.
Maintenance Tips
-
Clean Aluminum Panels: Wipe door panels regularly with a soft cloth and mild, non-abrasive cleaner to remove dirt and maintain the satin anodized finish.
-
Inspect Hinges & Pins: Check Easy Swing® hinges, bottom pins, and spindle assemblies for looseness or wear; tighten or replace as needed.
-
Check Door Alignment: Ensure both door leaves swing freely, meet evenly at the center, and close flush without rubbing or catching. Adjust hinges or frame as necessary.
-
Inspect Windows & Seals: Examine the 9″×14″ acrylic vision windows for cracks or hazing and ensure surrounding seals and frames are intact.
-
Monitor Panel Condition: Inspect aluminum panels for dents, corrosion, or fatigue, especially in high-traffic areas.
-
Lubricate Moving Parts: Apply a lightweight lubricant to hinge joints, rollers, and pins every 3–6 months to maintain smooth operation and reduce noise.
-
Routine Inspection: At least twice a year, check all fasteners, clean hardware, verify operation under load, and replace any worn parts.
