Curtron SPD-30-SS-GK-DBL-4896 48" x 96" Service-Pro Series 30 Double Swing Door - CUSPD30SSGKDBL4896
The Curtron SPD-30-SS-GK-DBL-4896 Swing Door is ideal for separating dining areas from kitchen areas. It reduces noise and, thereby, increases customer satisfaction. It has a durable 18 gauge stainless steel exterior and 0.750" exterior grade wood core. It has a full perimeter gasket. The SPD-30-SS-GK-DBL-4896 Swing Door has two 24" x 96" door panels and two 9" x 14" clear windows. It includes a hinged assembly and bottom pin.
Features
- (2) 24" wide x 96" high door panels
- 18 gauge stainless steel exterior
- Full perimeter gasket
- 0.750" exterior grade wood core
- (2) 9" x 14" clear windows
- No kickplate / impact plate
- Hinged assembly and bottom pin
Specifications
- Model: SPD-30-SS-GK-DBL-4896
- Dimensions: 96" H x 48" W
- Approximate Weight: 180 lbs.
What our Experts Think
-
Generous access size: This model provides a double‑panel swing door design with an opening dimension of approximately 60″ wide × 84″ high, allowing smooth traffic with carts, equipment, or multiple people through one threshold.
-
Durable stainless finish & construction: External surfaces are in 18‑gauge stainless steel (as indicated by “SS”), giving the door a clean, hygienic, and commercial‑grade look while resisting corrosion and wear in busy environments.
-
Designed for push‑cart and pedestrian traffic: The “GK” designation (guard kit) suggests the door includes protective features (e.g., kick/impact plate or guard reinforcement) to handle frequent use and incidental impacts common in kitchens, service areas or high‑traffic zones.
-
Standard visibility windows for safety: Each panel comes with a built‑in 9″ × 14″ clear window, facilitating visibility in both directions—helpful for avoiding collisions and improving flow in service corridors.
-
Medium‑duty core with ease of swing: The Series 30 line uses a 0.750″ moisture‑resistant composite wood core and Easy Swing® hinges, making it suitable for facilities requiring dependable performance without the heavy insulation of higher‑end models.
-
Installation readiness must be verified: While the wide opening is an advantage, ensure your framing accommodates full 60″ width and 84″ height, that swing clearance is clear of obstructions on both sides, and that structural header and floor supports are correct for the traffic load.
Q&A
Q: What is the SPD‑30‑SS‑GK‑DBL‑4896 model?
A: A double‑leaf swing door from Curtron’s Service‑Pro Series 30, designed for interior commercial openings requiring frequent access and separation.
Q: What are its dimensions and panel configuration?
A: Measures approximately 48″ wide (two 24″‑wide panels) × 96″ high, with both panels swinging both directions for easy bidirectional traffic.
Q: What construction and material features does it include?
A: 18‑gauge stainless steel exterior, moisture‑resistant 0.75″ core, full‑perimeter gasket sealing, and two clear windows (9″ × 14″) for visibility.
Q: What environments is this door best suited for?
A: Ideal for restaurant kitchens, food‑service zones, convenience stores, and back‑of‑house areas where moderate‑duty traffic and separation are needed.
Q: What should installers verify before installation?
A: Confirm opening accommodates 48″ width × 96″ height, ensure both swing clearances are available, check structural frame supports sealing and hardware, and select appropriate finish and hardware for your application.
Maintenance Tips
-
Lubricate Hinges and Pivots: Apply lubricant regularly to maintain smooth double-swing motion.
-
Clean Door Surfaces: Wipe stainless steel surfaces with a soft cloth and mild detergent to prevent buildup.
-
Inspect Gaskets and Seals: Keep gaskets clean and intact for proper insulation and energy efficiency.
-
Tighten Hardware: Periodically check screws, bolts, and mounting components for stability.
-
Check Alignment: Adjust doors if swings are uneven to prevent hinge stress and ensure smooth operation.
