Modine Hot Dawg Garage Heater - 100K BTU/Direct Spark Ignition/NG/Single Stage w/Stainless Steel Heat Exchanger
The Modine Hot Dawg Garage Heater is the ultimate solution for keeping your garage or workshop warm and comfortable, even during the coldest months. With an impressive 100,000 BTU output, this heater delivers efficient heating performance, ensuring your space remains cozy and functional.
Features
-
Made in the USA
-
Low profile, lightweight design easily installs 1” from ceiling with only two angle brackets (sold separately)
-
Field fuel conversion kits available
-
Finger-proof fan guards on all units
-
Reduce the need for maintenance with the permanently lubricated motor
-
100% shut-off with continuous retry to allow for safe ignition in the event the unit doesn’t light on the first try
-
Power vented model simplifies side-wall or roof venting with small-diameter vent pipe
-
Draws combustion air from inside the workspace
-
4" vent connection
-
Natural gas
-
100,000 BTU
-
Direct spark ignition
-
Two stage - allows for firing rate of 50% and 100% of full rated input
-
Stainless steel heat exchanger
Specifications
| Fuel Type |
Natural Gas |
| Control Type |
Electronic/IPI |
| Color/Finish |
Gray |
| Size |
35.5"W x 20.5"T x 31"D |
What Our Experts Think
-
Reliable 100K BTU Heating: Ideal for medium to large garages, workshops, and commercial spaces, providing efficient and consistent warmth.
-
Stainless Steel Heat Exchanger: Built to last, offering superior corrosion resistance and ensuring long-term, reliable performance.
-
Direct Spark Ignition: Efficient, quick start-ups with reduced fuel waste, ensuring energy savings and reliability.
-
Natural Gas Compatibility: Designed for seamless integration with natural gas, offering convenience and lower operating costs.
-
Single-Stage Operation: Simplifies usage, providing consistent heating with minimal maintenance or complex settings.
-
Quiet and Compact: Compact design and low noise make it ideal for indoor applications in confined spaces.
Q&A
Q: What is the heating capacity of this unit?
A: The Modine Hot Dawg 100K BTU provides 100,000 BTU, perfect for heating spaces up to approximately 1,500 sq. ft.
Q: What type of ignition system does it use?
A: It features Direct Spark Ignition (DSI) for reliable and efficient startups.
Q: What fuel type is required for this unit?
A: This model operates on Natural Gas (NG).
Q: What is the heat exchanger made of?
A: The heat exchanger is made from durable stainless steel, providing excellent corrosion resistance and longevity.
Q: Is it suitable for residential use?
A: Yes, it is ideal for residential garages, workshops, and other medium-sized spaces.
Q: How does the single-stage system work?
A: The heater operates at one consistent heat level, providing straightforward and reliable heating for your space.
Q: Can this unit be installed in smaller spaces?
A: Yes, it can be used in smaller areas, but professional installation is recommended to ensure optimal performance and safety.
Q: Does it require professional installation?
A: Yes, professional installation is recommended for proper venting, safety, and code compliance.
Q: What safety features are included?
A: The heater includes flame failure shutoff and overheat protection for safe operation.
Q: Is it quiet when operating?
A: Yes, it operates quietly and efficiently, making it suitable for both home and work environments.
Maintenance Tips
-
Clean the Unit: Regularly clean the exterior and vacuum the interior to prevent dust and debris buildup that could impact performance.
-
Inspect Gas Connections: Check natural gas lines for leaks using a soapy water solution; repair any leaks immediately.
-
Test the Ignition System: Test the direct spark ignition system monthly to ensure reliable operation and quick startup.
-
Monitor Flame Quality: Ensure the burner flame is steady and blue. Yellow or flickering flames may indicate a dirty burner or combustion issues.
-
Check Ventilation: Ensure air intake and exhaust vents are clear to maintain proper airflow and prevent unsafe operation.
-
Inspect Stainless Steel Heat Exchanger: Annually inspect the heat exchanger for signs of wear, corrosion, or damage to maintain optimal heat transfer.
-
Check Burner for Debris: Periodically clean the burner to remove soot or other debris that can block airflow and reduce efficiency.
-
Annual Professional Servicing: Schedule a certified technician for annual maintenance to ensure all components, including the burner, ignition system, and heat exchanger, are functioning properly.
