Curtron SPD-20-AL-DBL-7884 78" x 84" Service-Pro Series 20 Swinging Door - CUSPD20ALDBL7884
The Curtron SPD-20-AL-DBL-7884 is designed specifically to increase customer and employee comfort. It does this by reducing the noise coming from the kitchen, stock rooms, warehouses, and other such areas while providing years of dependable service. The Service-Pro Door has an attractive design, engineered of .063" tempered aluminum with a satin anodized finish. It has two 9" x 14" clear windows. It does not come with a kickplate or bottom pin. The SPD-20-AL-DBL-7884 does, however, come with a hinged assembly and bottom pin. It has two 39" x 84" door panels.
Features
- (2) 39" x 84" door panels
- .063" tempered aluminum with satin anodized finish
- (2) 9" x 14" clear windows
- No kickplate / impact plate
- Hinged assembly and bottom pin
- Increases customer and employee comfort by reducing noise and providing years of dependable service
- Every Service-Pro door comes with the outstanding customer service and support of Curtron Products
- Attractive impact doors used in customer and back kitchen areas as well as in retail and industrial environments
- Creates a barrier between customers and kitchens, stock rooms, warehouses and more
Specifications
- Model: SPD-20-AL-DBL-7884
- Dimensions: 84" H x 78" W
- Approximate Weight: 160 lbs.
What our Experts Think
-
Generous Double-Swing Access: Provides a 78″ wide × 84″ high opening with two side-by-side panels, ideal for busy two-way traffic zones in service or back-of-house areas.
-
Light-Duty Aluminum Construction: Made with .063″ tempered aluminum and a satin-anodized finish, suitable for frequent personnel traffic but not heavy carts or forklifts.
-
Built-In Visibility: Each panel includes a 9″ × 14″ clear window to improve sight-lines and reduce collision risk.
-
Bi-Parting Design for Efficiency: The two-panel swing configuration allows smooth two-way flow and faster movement in high-traffic areas.
-
Installation Considerations: Ensure the rough opening accommodates 78″ width × 84″ height, allow sufficient swing clearance on both sides, and confirm wall/frame support matches the door size.
-
Ideal Usage: Best for commercial service corridors, kitchen entrances, or retail/service area transitions where personnel flow is constant and heavy-duty traffic is not expected.
Q&A
Q: What is the SPD‑20‑AL‑DBL‑7884 model?
A: A double‑leaf aluminum swing door from Curtron’s Service‑Pro Series 20, designed for light‑duty commercial traffic areas with a wide opening size of 78″ × 84″.
Q: What are its dimensions and panel configuration?
A: Measures approximately 78″ wide and 84″ high in total. It consists of two panels (each roughly 39″ wide × 84″ high) that swing both directions for two‑way traffic flow.
Q: What construction and material features does it offer?
A: Constructed using .063″‑thick tempered aluminum with satin‑anodized finish. Includes built‑in 9″ × 14″ clear windows for visibility and reinforced back‑spine support for durability.
Q: What environments is this door best suited for?
A: Ideal for commercial kitchens, food‑service back‑of‑house entrances, convenience‑store service zones, or any setting requiring a wide, bidirectional access door with durable aluminum construction and moderate traffic throughput.
Q: What should installers check before purchase and installation?
A: Ensure the structural opening accommodates 78″ width × 84″ height; confirm there is adequate clearance on both sides for the door panels to swing; verify the frame and hardware are compatible with an aluminum dual‑swing door; and select the appropriate finish and vision‑panel layout for the facility’s environment.
Maintenance Tips
-
Clean Aluminum Panels: Wipe satin-anodized aluminum panels regularly with a soft cloth and mild, non-abrasive cleaner to remove dirt and maintain finish.
-
Inspect Hinges & Pins: Check Easy Swing® hinges, bottom pivot pins, and mounting hardware for looseness or wear; tighten or replace as needed.
-
Check Door Alignment: Ensure both door leaves swing freely, meet evenly in the center, and close flush without rubbing or catching.
-
Inspect Windows & Seals: Examine the 9″ × 14″ acrylic windows for cracks or clouding, and ensure surrounding seals are intact.
-
Monitor Panel Condition: Inspect aluminum panels for dents, corrosion, or fatigue, especially in high-traffic areas.
-
Lubricate Moving Parts: Apply lightweight lubricant to hinge joints and pivot pins every 3–6 months to maintain smooth motion and reduce noise.
-
Routine Inspection: Twice a year, check fasteners, clean hardware, test operation under traffic, and replace any worn parts.
